Description
The meter is very useful to see if the osmosis is working properly. The result has to be 90% less PPM than the inlet water to the equipment for it to function properly.
Main characteristics of the TDS meter to analyze osmosis water:
– The result must be 90% less PPM than in the input water to the equipment so that it works correctly.
– The meter is very useful to see if the osmosis is working correctly.
– TDS meter (ppm) and conductivity (QS/cm).
– Temperature gauge in ºC and ºF
– Quality indicator light (changes from green to red if the water exceeds 40ppm)
Technical characteristics of the TDS meter to analyze osmosis water:
– Battery: CR2032 DC32
– TDS: 0-4999 ppm
– Conductivity: 0-9999 QS/cm
– Temperature: 0-99ºC, 32-210ºF
< p>
– Screen: LCD
– 1000 hours of continuous operation
– 3 years warranty
– Model: reference 267900
– Product manufacturer: WATERFILTER
Instructions for use of the TDS meter to analyze osmosis water :
– Uncover the analyzer electrodes
– Press the ON/OFF-HOLD key to turn on the analyzer
– Immerse the electrodes in the liquid. The analyzed value will be displayed.
– Pressing the MODE key will alternate between TDS, conductivity and temperature.
– Pressing the HOLD key will hold the analyzed value.
< p>– Pressing the CLEAR key will clear the set value.
– Press the ON/OFF-HOLD key for 3 seconds to turn off the analyzer.
Reviews
There are no reviews yet.